Re: xtream editor

Enigma2 & Xtream Editor Plug-In https://www.youtube.com/watch?v=IDRCuz-F9RM

The plug-in helps you to load the channel list, picon and EPG onto the Enigma2 box. Only EPG from us are supported. However, you should first adjust the "EPG ID" in your channel list to the EPG source.
Since version 2.10 you can also send DVB channels to the editor and edit them there. You can assign the DVB channels our EPG ID. These DVB channels get our EPG data as well as Picon
Prerequisite for a functioning EPG is the EPG-ID assignment
Preparing your playlist:

• Create a list or line
• Assign each channel to an EPG-ID (EPG-ID assignment)
• Activate Parental control in the groups (Edit category -> Censored)

Preparation of Enigma2 Box:

• Set the correct time
• Activate multi-bouquet. Should be found under Settings. For most distributions, this option is already set.
• Activate Parental Control and enter a PIN. The code from the Xtream Editor can not be imported. You must specify this directly in the box.

Install Xtream Editor Plug-in (SSH Client):

• Connect to your box using an SSH or Telnet client like Putty.
• Run this command:
  IPK OE1.6 - OE2.0 like OpenaATV, OpenPli, OpenVix,....
  wget -O /tmp/install.sh "http://xtream-editor.com/files/ipk/install.sh" && chmod 755 /tmp/install.sh && /tmp/install.sh DEB OE2.5 like DreamOS, NewNigma2
  wget -O /tmp/install.sh "http://xtream-editor.com/files/deb/install.sh" && chmod 755 /tmp/install.sh && /tmp/install.sh

Alternative installation(FTP):

• Download the ZIP file To your computer.
• Unpack the ZIP and copy the IPK or DEB file into the "/tmp" folder via FTP. The DEB file is intended for OE2.5.
• Install the IPK or DEB on your Enigma2 box. Enigma2 is available in different versions (Images). How to manually install a plug-in can be found in the forum of the distribution. Ex. OpenATV
• Restart Enigma2.

Configure Xtream Editor Plug-in (Basic):

• Open the Xtream Editor plug-in
• You will see an APP code.
• Link your Line- or List-ID with this code. Go to the editor in one of your playlists and paste this code.
• Press YELLOW to load the configuration and the bouquets to the box. Then the plugin is now connected to your playlist.
• Press BLUE to get EPG.

Advanced settings


Auto Import (enable, disable)
When this option is enabled, your bouquets and EPG are loaded daily at a certain time automatically.
When in deep standby (Wake up and import, Skip the import)
The automatic import can also be performed when the box is in standby. Choose "Wake up and import" there if you want. (Prerequisite Auto import)
Import bouquets every hour (enable, disable)
With this setting, the bouquets (without EPG) are loaded every hour. (Prerequisite Auto import)
Start import after booting up (enable, disable)
This setting is recommended when you turn off the box completely. Auto Import only works in standby.
Service Type (DVB (1), IPTV (4097), GSTREAMER (5001), EXTPLAYER (5002))
This setting allows you to choose which player E2 will use for your streams.
- DVB(1) default DVB player
- IPTV(4097) default IPTV player
- GSTREAMER (5001) For this you need an additional plugin (Serviceapp)
- EXTPLAYER (5002) For this you need an additional plugin (Serviceapp)
LineID
ID of the connected playlist in the editor
Import EPG (enable, disable)
Here you can determine if you want to load our EPG data
Import picon (enable, disable)
Here you can determine if you want to load our Picons
Picon location
Here you determine where the picons should be stored
Clear EPG (enable, disable)
With this setting, you can specify whether the EPG.dat is to be deleted before the import. This option should not always be activated. Activate this option if you have problems loading the EPG data or want to delete the wrong EPG
INFO Button
You will see when the last import has taken place
MENU Button

1. Export DVB-Channels
This sends all bouquets not created by the Xtream Editor to the editor. The editor creates new groups with the name of the bouquet and the app code. Example: Favorites - A1B2C3D4
You can then distribute the DVB-C, DVB-S and DVB-T channels in different groups. This allows you to insert DVB channels into the group of IPTV channels. After the next import, they will be sent back to the box.
Important for PRO users. You must first enable the DVB import in the editor. In the device overview
2. Show log
If you have problems with the import, you might find the reason there. Is very important for our support.
3. Update plugin
When a new version of the plugin is released, you will receive a message after the import. You can then click MENU and select this option. The plugin will be updated automatically and the box will be restarted.
4. Import EPG
The EPG data is loaded
5. Import Bouquets
The bouquets (without EPG data) are loaded
6. Reset Config
The plugin is reset. New app code is generated. Then you need to connect the code to a playlist
7. Clear EPG
The EPG.dat and cache will be deleted.

Re: xtream editor

Niente da fare non ci riesco grazie mille rimango bloccato qui non capisco cosa e questa LineID mille grazie
xtream editor-firefox_screenshot_2017-12-16t10-18-37.190z.jpg