Re: enigma2-plugin-extensions-barryallen

enigma2-plugin-extensions-barryallen_5.1.40_mipsel
www.multiupload.com/DP69G4CUX1

Re: enigma2-plugin-extensions-barryallen

Barry Allen 6.0.4

Hi!

Here is the changelog for the 6.0.4 version releaste BA.

The kit is now down to it already

* It is now again a releaste kit and the kit does not expire after a short time schobn, but as usual it is now all previous versions of BA no longer supported.

* This version is compatible ONLY with the more original Loader # 84 of DMM (in 7025 it can therefore only with the ipk for cheating Loder 84, the use here append)

* This version of BA was cleared out DRASTICALLY - the kit is MUCH smaller and leaner and thus should still all the current things still work.

* What I have first thrown out, because there is already some time disabelt and no one has asked the shell script is also in other languages, run it, plug the BA and BA Webif of course continue to the full language support.

* The Multiboot Download Center is finally kicked out after serving his entire OoZooN feed as a web page makes no sense - RIP.

* Bzip2 was also thrown out because the MB_ *. tar files uncompressed so now be made, so it is not necessary in the ipk kit to lug around, who needs it anyway bzip2 has to feed the software of most images.

The BA * Get last option kit to look at whether there is a new BA kit is also kicked out, because who is also on the homepage OoZooN as it stands im about.

* Because we have in the boot logo thread, the problem was to position the Barry Allen logo for a new boot logo correctly I made ALL boot logo out to a black - as in department stores where the mannequins are in Neudekorieren first put into black plastic bags. I've always been all over the logos and fonts in considering your own theme pack outsource kit for BA, or may indeed any appropriate tar.gz or IPKS to / media / ba / logos and / media / ba / fonts make.

* The boot manager should now ALL on / dev / input / event * respond, we must therefore change anything, no matter which remote control is used (old / new / DMM keyboard). Hence the setting for the plugin is removed because no longer needed - RIP.

* Changing the color mode (RGB, ...) when bootmenu is kicked out, when connected via HDMI, you need the eh no more and if someone has a problem on the 7025 so you can do that also in the bios change.

* There is now a Autoswap feature - once you have created on / media / ba BA with a swapfile (minimum size is now 128MB), this in ALL the boot images (including Flash) automatically without beswapped fstab or the like.

Devices * File system check of the BA is now when you are booted from Flash made when you type in telnet bainit 90, with all numbers> 89, the cause in order to avoid further confusion.

* DO NOT use it OoZooN (or another image where the loop device driver in the kernel are fixed) image in flash or instralliert not on a 7025 then it MUST be the kernel-module-loop re-install ipk, otherwise BA NOT work!

* It is now a binary bainit and NO more shell script and it will stay that way!

LG
gutemine

Re: enigma2-plugin-extensions-barryallen

Barry Allen & Support Kit 6.0 Released thread
Here is the changelog for the 6.0.7 version of Barry Allen.

* This is another version releaste in almost all bugs should be now fixed in 6.0.4-6, which all previous versions are no longer supported.

* This version is compatible ONLY with the original loader # 84 of DMM (in 7025 it can therefore only with the ipk for cheating Loder 84, the use here append)

* Because we are working in the new boot logo BA thread still on, I made out to ALL boot logos on a black - as in department stores where the mannequins are also used when decorating for the first time put into black plastic bags.

* The boot manager should now ALL on / dev / input / event * respond, we must therefore change anything, no matter which remote control is used (old / new / DMM keyboard). Hence the setting for the plugin is removed because no longer needed - RIP.

* There is now a Autoswap feature - once you have created on / media / ba BA with a swapfile (minimum size is now 128MB), this in ALL the boot images (including Flash) automatically without beswapped fstab or the like.

* For all boxes except the 7025 is the enigma2 restart when unpacking / save images of disabelt the installation, so it runs through enigma2 - is exactly why but now when backing also calls for the swapfile.

* As a 'little help' for the new fixed mounting images without hard disk that I installed when a new BA FIRST image that will boot times when there are no settings inside then the / dev/sda1 (which is usually the hard disk) in the BA image on / media / hdd mount so that during the Settup wizard on first boot can restore the settings from there. Once settings are in the image but if this be not done, but if you mount the hard disk of the settings stored in clean, has no problem should be more.

Devices * File system check of the BA is now when you are booted from Flash made when you type in telnet bainit 90, with all numbers> 89, the same effect as to avoid further confusion.

* DO NOT use it OoZooN image (or other image where the loop device driver is fixed in kernel) in Flash or is not installed it on a 7025 then you MUST re-install the kernel-module-loop ipk in the flash image, otherwise Barry Allen is NOT ! work!

* It is now a binary bainit and NO more shell script and it will stay that way!

And the new guidance by romeo-golf with Barry Allen is 6.0 here:

Barry Allen instruction

LG
gutemine

Re: enigma2-plugin-extensions-barryallen

Barry Allen 6.2.6


Hier ist das Changelog für die Version 6.2.6 von Barry Allen.

* Das ist wieder eine releaste Version in der alle bekannten Bugs aus den früheren Versionen gefixed sein sollten, womit alle früheren Versionen nicht mehr supported sind.

* die Probleme mit manchen Sprachversionen sollten jetzt wieder gefixed sein

* das Abbrechen des Backups ist jetzt wieder gefixed

* das patchen der fstab für Softwareupdates sollte jetzt stabiler funktionieren

* man kann jetzt erstmals nur zum Testen die Auflösung des Bootmenus des Bootmanagers in den BA Einstellungen umstellen

Auch der Wally West Support scheint jetzt stabil zu sein und ist damit Released. Infos dazu und den WW kit findet Ihr im WW Thread:

Wally West 6.2 für Barry Allen 6.2

* Diese Version läuft NUR mit dem original Loader #84 von DMM (bei der 7025 kann man es daher NUR mehr mit Loader 83 und dem Schummel ipk für Loder 84 benutzen das auch hier anhängt). Ausnahme ist die dm7020HD, da MUSS jetzt bereits Loader #86 auf der Box sein

* Beim BA 6.2 wird der loop device Treiber NICHT mehr nachladen, weil der BA 6.2 kit ist für Images >= den 3.2.2 release Images gedacht wo der loop device Treiber schon fix im Kernel ist. Wenn man KEIN aktuelles Image mit Loop device Treiber im Kernel im Flash hat wird der BA 6.2 kit die Installation daher verweigern !

* der /MB_Images link deutet ab jetzt auf /media/hdd/backup oder /media/ba/backup

* das BA WebIF geht jetzt NUR mehr mit aktuellem ImageWebIF dafür ist es aber dort bei den Extras zu finden. Direkter Aufruf mit http://ip.deiner.dream.box/barryallen geht natürlich weiterhin.

* der Device Label des BA devices ist jetzt ba und nicht mehr BA - dies wird beim Updaten auf 6.2 automatisch angepasst.

* für die Leute denen im Layout 3 die /media/ba/ba/1..8 mounts verloren gegangen sind aus irgendwelchen Gründen (chroot,...) habe ich jetzt noch ein bainit 900 reingemacht das nur alle Imagepartitionen remountet

* der Bootmanager hat jetzt wenn man WW mit FAT für den Imagekernel verwendet (egal ob Layout 2 oder 3) neben enable und disable noch einen 3. Zustand: wobble

Das funktioniert so das man wenn man WW mit FAT verwendet den bootmanager aufgedreht hat und TROTZDEM der Imagekernel verwendet wird statt dem Flashkernel.

Falls man dann im Bootmanager ein anderes Image auswählt als das zuletzt gebootete (dessen Kernel im FAT liegt) dann wird noch schnell das FAT mit dem neuen Kernel und Bootlogos befüllt, ABER die Box sofort rebootet und das neue Image gleich einmal ohne Bootmanager gebootet mit seinem eigenen Kernel aus dem FAT. Beim nächsten Boot ist der Bootmanger aber wieder an und so fort.

Daher der Name wobble :-)

LG
gutemine

Re: enigma2-plugin-extensions-barryallen

Barry Allen 9.1 Released

Thx gutemine

Re: enigma2-plugin-extensions-barryallen

Barry Allen 11.0.3

Thx gutemine

Re: enigma2-plugin-extensions-barryallen

Barry Allen 11.0.4

Thx @ gutemine