annuncio

Comprimi
Ancora nessun annuncio.

Oscam + Raspberry + smargo ....Aiuto.

Comprimi
X
Comprimi
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
  • Pagina di 1
  • Filtro
  • Ora
  • Visualizza
Elimina tutto
nuovi messaggi
Precedente template Succ.
  • #1

    Oscam + Raspberry + smargo ....Aiuto.

    Ciao, sto smanettando con un Raspberry e smargo x la prima volta...
    dopo avere installato tutto l'occorrente (almeno penso), non riesco a leggere le card (diritti).
    log test card jsc:
    [reader]
    label = jsc_test
    protocol = smargo
    device = /dev/ttyUSB0
    autospeed = 1
    caid = 0500
    detect = cd
    mhz = 480
    cardmhz = 369
    ident = 0500:042400;0500:042410
    group = 1
    emmcache = 1,1,2
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1

    2014/02/07 17:41:58 0 s >> OSCam << cardserver started, version 1.20-RuBeNi_Modd, build r656 (arm-bcm2708hardfp-linux-gnueabi-libusb-pcsc)
    2014/02/07 17:41:58 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5229
    2014/02/07 17:41:58 0 s services reloaded: 0 services freed, 26 services loaded, rejected 0
    2014/02/07 17:41:58 0 s userdb reloaded: 32 accounts loaded, 7 expired, 6 disabled
    2014/02/07 17:41:58 0 s signal handling initialized
    2014/02/07 17:41:58 0 s 1819 service-id's loaded in 22ms
    2014/02/07 17:41:58 0 s 1000 provid's loaded
    2014/02/07 17:41:58 0 s cccam: initialized (fd=5, port=18987)
    2014/02/07 17:41:58 0 s jsc_test [smargo] creating thread for device /dev/ttyUSB0
    2014/02/07 17:41:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
    2014/02/07 17:41:58 0 s waiting for local card init
    2014/02/07 17:41:58 576660 r jsc_test [smargo] smargo init type is smargo
    2014/02/07 17:41:58 5BC5A0 h webif: decompressed 69915 bytes back into 194300 bytes
    2014/02/07 17:41:58 5BC5A0 h HTTP Server running. ip=0.0.0.0 port=8888
    2014/02/07 17:41:58 576660 r jsc_test [smargo] clocking for smartreader with smartreader protocol
    2014/02/07 17:41:58 576660 r jsc_test [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cts, mhz= AUTO, cardmhz=369)
    2014/02/07 17:41:59 576660 r jsc_test [smargo] card detected
    2014/02/07 17:42:03 576660 r jsc_test [smargo] ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
    2014/02/07 17:42:03 576660 r jsc_test [smargo] Warning: D=0 is invalid, forcing D=1
    2014/02/07 17:42:03 576660 r jsc_test [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
    2014/02/07 17:42:03 576660 r jsc_test [smargo] Calculated work ETU is 69.66 us reader mhz = 534
    2014/02/07 17:42:03 576660 r jsc_test [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
    2014/02/07 17:42:04 576660 r jsc_test [smargo] card system not supported
    2014/02/07 17:42:04 576660 r jsc_test [smargo] Normal mode failed, reverting to Deprecated Mode
    2014/02/07 17:42:08 576660 r jsc_test [smargo] ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
    2014/02/07 17:42:08 576660 r jsc_test [smargo] Warning: D=0 is invalid, forcing D=1
    2014/02/07 17:42:08 576660 r jsc_test [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
    2014/02/07 17:42:08 576660 r jsc_test [smargo] Calculated work ETU is 69.66 us reader mhz = 534
    2014/02/07 17:42:09 576660 r jsc_test [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
    2014/02/07 17:42:10 576660 r jsc_test [smargo] card system not supported
    2014/02/07 17:42:10 576660 r jsc_test [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
    2014/02/07 17:42:10 576660 r jsc_test [smargo] card initializing error
    2014/02/07 17:42:10 0 s init for all local cards done
    2014/02/07 17:42:10 0 s anti cascading disabled
    2014/02/07 17:42:10 5C0CE8 c plain dvbapi-client granted (dvbapi, au=off)
    2014/02/07 17:42:10 5C0CE8 c ERROR: Could not detect DVBAPI version.
    Tag: Nessuno
  • #2
    Re: Oscam + Raspberry + smargo ....Aiuto.

    non sono sicuro...ma prova ad mettere il smargo in AUTO...cioe si cerca lui la frequanza giusta...

    che smargo hai



    Maxdigital??...op un clone...essistono progr. per windows...incui puoi mettere i settagi per il smatgo...e dopo lo rimetti di nuovo nel raspberri PI..(ottima robba ;-))

    vedendo il LOG vede l'atr....ma mi sembra la velocita non ci piace.......


    hai preso una oscam per la tua rasberry???
    -->No IRDETo-Files/Keys or communication allowed..... also about CS!!!

    °°OpeNyourEyeS°°

    COMMENTA

    • #3
      Re: Oscam + Raspberry + smargo ....Aiuto.

      Argolis smargo.
      Dovrebbe gia' essere su auto.
      Oscam Ruben modded...
      Una config funzionante?

      COMMENTA

      • #4
        Re: Oscam + Raspberry + smargo ....Aiuto.

        se togli la mhz ??

        prova all'inizio un puo di non fare overclocking...cioe con 357MhZ....per MHZ e cardMHZ





        hai una versione speciale per rasberry???
        -->No IRDETo-Files/Keys or communication allowed..... also about CS!!!

        °°OpeNyourEyeS°°

        COMMENTA

        • #5
          Re: Oscam + Raspberry + smargo ....Aiuto.

          non capisco cosa centrano i diritti visto che la oscam si pianta ......
          codice:
          2014/02/07 17:42:10 5C0CE8 c ERROR: Could not detect DVBAPI version.
          oscam è stata compilata con il modulo dvbapi attivo, quindi in fase di avvio va a cercare il pid-ecm che ovviamente non trova in quando il Rb non ha il tuner on board ..... va ricompilata senza modulo dvbapi.

          saluti

          COMMENTA

          • #6
            Re: Oscam + Raspberry + smargo ....Aiuto.

            anche senza dvbapi....

            2014/02/08 13:53:25 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9462 (arm-linux-gnueabihf)
            2014/02/08 13:53:25 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3490
            2014/02/08 13:53:25 0 s services reloaded: 0 services freed, 26 services loaded, rejected 0
            2014/02/08 13:53:25 0 s userdb reloaded: 32 accounts loaded, 7 expired, 6 disabled
            2014/02/08 13:53:25 0 s signal handling initialized
            2014/02/08 13:53:25 0 s 1819 service-id's loaded in 19ms
            2014/02/08 13:53:25 0 s 1000 provid's loaded
            2014/02/08 13:53:25 0 s cccam: initialized (fd=5, port=*******)
            2014/02/08 13:53:25 0 s jsc_test [smargo] creating thread for device /dev/ttyUSB0
            2014/02/08 13:53:25 0 s loadbalancer: can't read from file /tmp/.oscam/stat
            2014/02/08 13:53:25 0 s waiting for local card init
            2014/02/08 13:53:25 101BE00 r jsc_test [smargo] smargo init type is smargo
            2014/02/08 13:53:25 10A9598 h webif: decompressed 65909 bytes back into 192472 bytes
            2014/02/08 13:53:25 10A9598 h HTTP Server running. ip=0.0.0.0 port=8888
            2014/02/08 13:53:25 101BE00 r jsc_test [smargo] clocking for smartreader with smartreader protocol
            2014/02/08 13:53:25 101BE00 r jsc_test [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cts, mhz=369, cardmhz=369)
            2014/02/08 13:53:26 101BE00 r jsc_test [smargo] card detected
            2014/02/08 13:53:31 101BE00 r jsc_test [smargo] ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
            2014/02/08 13:53:31 101BE00 r jsc_test [smargo] Warning: D=0 is invalid, forcing D=1
            2014/02/08 13:53:31 101BE00 r jsc_test [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
            2014/02/08 13:53:31 101BE00 r jsc_test [smargo] Calculated work ETU is 100.81 us reader mhz = 369
            2014/02/08 13:53:31 101BE00 r jsc_test [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
            2014/02/08 13:53:32 101BE00 r jsc_test [smargo] card system not supported
            2014/02/08 13:53:32 101BE00 r jsc_test [smargo] Normal mode failed, reverting to Deprecated Mode
            2014/02/08 13:53:36 101BE00 r jsc_test [smargo] ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
            2014/02/08 13:53:36 101BE00 r jsc_test [smargo] Warning: D=0 is invalid, forcing D=1
            2014/02/08 13:53:36 101BE00 r jsc_test [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
            2014/02/08 13:53:36 101BE00 r jsc_test [smargo] Calculated work ETU is 100.81 us reader mhz = 369
            2014/02/08 13:53:36 101BE00 r jsc_test [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
            2014/02/08 13:53:37 101BE00 r jsc_test [smargo] card system not supported
            2014/02/08 13:53:37 101BE00 r jsc_test [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
            2014/02/08 13:53:37 101BE00 r jsc_test [smargo] card initializing error
            2014/02/08 13:53:38 0 s init for all local cards done
            2014/02/08 13:53:38 0 s anti cascading disabled

            dove è l'inghippo?
            Grazie....

            COMMENTA

            • #7
              Re: Oscam + Raspberry + smargo ....Aiuto.

              io quando ho...card system not supported....ho fatto un paio di restart del reader stesso nel webif...fino che parte......hai provato a metterlo in 3,57MhZ


              il 369Mhz nel smargo penso se riccordo bene...si deve settare tramite il PC


              prova cosi con il smargo

              Mode = Autoswitch
              Kernel=Dreambox
              T-mode= T=1 ( prova pure con T=0 se non funzia)
              EGT = 0





              INFo

              T-mode stands for transmission protocol. I.o.w. the way the decive 'talks' to a smartcard.
              In short it comes down to this:
              T=0 -> character protocol
              T=1 -> block protocol

              Different cards require a different way of communication. Without getting all to technical it basically comes down to this:
              seca, conax, cr*ptoworks, n*s, viaccess -> T=0
              Irdeto (b*tacr*pt, Nagra? Haven't tested) -> T=1

              Parity is also of importance (parity tag in newcs.xml):
              seca, conax, c*y*toworks = even
              nds, viaccess = odd
              irdeto = doesn't matter much (because T=1)
              -->No IRDETo-Files/Keys or communication allowed..... also about CS!!!

              °°OpeNyourEyeS°°

              COMMENTA

              • #8
                Re: Oscam + Raspberry + smargo ....Aiuto.

                Originariamente inviato da CiCLoPe Visualizza il messaggio
                io quando ho...card system not supported....ho fatto un paio di restart del reader stesso nel webif...fino che parte......hai provato a metterlo in 3,57MhZ


                il 369Mhz nel smargo penso se riccordo bene...si deve settare tramite il PC


                prova cosi con il smargo

                Mode = Autoswitch
                Kernel=Dreambox
                T-mode= T=1 ( prova pure con T=0 se non funzia)
                EGT = 0





                INFo

                T-mode stands for transmission protocol. I.o.w. the way the decive 'talks' to a smartcard.
                In short it comes down to this:
                T=0 -> character protocol
                T=1 -> block protocol

                Different cards require a different way of communication. Without getting all to technical it basically comes down to this:
                seca, conax, cr*ptoworks, n*s, viaccess -> T=0
                Irdeto (b*tacr*pt, Nagra? Haven't tested) -> T=1

                Parity is also of importance (parity tag in newcs.xml):
                seca, conax, c*y*toworks = even
                nds, viaccess = odd
                irdeto = doesn't matter much (because T=1)

                il 369 se lo setta in automatico anche se metto 357 mhz e 357 cardmhz.
                dmesg:
                [ 412.772122] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
                [ 412.772714] usb 1-1.2: Detected FT232BM
                [ 412.772748] usb 1-1.2: Number of endpoints 2
                [ 412.772766] usb 1-1.2: Endpoint 1 MaxPacketSize 64
                [ 412.772787] usb 1-1.2: Endpoint 2 MaxPacketSize 64
                [ 412.772804] usb 1-1.2: Setting MaxPacketSize 64
                [ 412.773458] ftdi_sio ttyUSB0: Unable to read latency timer: -32
                [ 412.775031] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
                [ 455.075285] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 457.033064] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 458.994321] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 460.955605] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 463.417236] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 465.374949] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 467.336443] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 469.297714] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 471.759236] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 473.716697] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 475.678359] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 477.639857] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 836.221791] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 838.179573] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 840.166105] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 840.471305] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 841.778382] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 843.242038] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 845.221264] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 845.523841] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 892.242082] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 894.199824] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 896.186196] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 896.491072] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 897.797370] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 899.258042] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 901.239323] ftdi_sio ttyUSB0: requested CSIZE setting not supported
                [ 901.543187] ftdi_sio ttyUSB0: requested CSIZE setting not supported

                aiuto......

                COMMENTA

                • #9
                  Re: Oscam + Raspberry + smargo ....Aiuto.

                  elimina il parametro mhz e abilita autospeed

                  [reader]
                  label = jsc_test
                  protocol = smargo
                  device = /dev/ttyUSB0
                  autospeed = 1
                  caid = 0500
                  detect = cd
                  autospeed= 1
                  cardmhz = 369
                  ident = 0500:042400;0500:042410
                  group = 1
                  emmcache = 1,1,2
                  blockemm-unknown = 1
                  blockemm-u = 1
                  blockemm-s = 1

                  COMMENTA

                  • #10
                    Re: Oscam + Raspberry + smargo ....Aiuto.

                    Risolto così:
                    protocol = smartreader
                    device = 001:004

                    Tnx.

                    COMMENTA

                    Precedente template Succ.
                    Sto operando...
                    X

                    In base al nuovo regolamento Europeo relativo alla protezione dei dati personali delle persone fisiche ed alla loro libera circolazione, ti invitiamo a leggere la nostra dichiarazione di Privacy

                    Cliccando su "ACCONSENTO" accetti tutte le norme contenute nella dichiarazione. Sei inoltre consapevole che durtante la navigazione utilizzeremo dei cookies. Questi files servono per memorizzare dati e preferenze. I server di questo forum possono essere ospitati al di fuori del tuo Paese di origine, proseguendo nella navigazione acconsenti alla raccolta, alla memorizzazione e all'elaborazione dei tuoi dati nel paese in cui è ospitato migratoria.it. Come utente registrato hai la facoltà di cancellare, modificare o scaricare i dati personali contenuti nel server, tramite le Impostazioni sulla privacy.

                    ACCONSENTO