[DM800SE]configurazione corretta per 09cd e oscam

[tiger982]

Re: [DM800SE]configurazione corretta per 09cd e oscam

si solo questi 3 che mi hai suggerito

[BliNeR-KeY]

Re: [DM800SE]configurazione corretta per 09cd e oscam

2013/01/15 19:17:05 5C16C8 r skyitalia [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2013/01/15 19:17:05 2B0028B0 c user (09CD&000000/0000/35C8/B7:BA51A37F6BE88BC821C030E4A750484A): not found (26 ms) by skyitalia

mi si presenta continuamente questo problema e nessuna visione.

per cominciare, hai messo solo questi (3) files?

[tiger982]

Re: configurazione corretta per 09cd e oscam

2013/01/15 19:16:42 5C16C8 r skyitalia [internal] card detected
2013/01/15 19:16:43 5C16C8 r skyitalia [internal] ATR: 3F FD 15 25 02 50 80 0F 54 B0 04 69 FF 4A 50 D0 80 00 49 54 03
2013/01/15 19:16:43 5C16C8 r skyitalia [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2013/01/15 19:16:43 5C16C8 r skyitalia [internal] Setting baudrate to 153600 bps
2013/01/15 19:16:43 5C16C8 r skyitalia [internal] Calculated work ETU is 11.62 us
2013/01/15 19:16:43 5C16C8 r skyitalia [internal] ATR Fsmax is: 5 Mhz, clocking card to 2.00
2013/01/15 19:16:44 5C16C8 r skyitalia [internal] Card type: ITTV
2013/01/15 19:16:44 5C16C8 r skyitalia [internal] Rom version: 40T4
2013/01/15 19:16:45 5C16C8 r skyitalia [internal] parental lock setting: 9F FF FF FF
2013/01/15 19:16:45 5C16C8 r skyitalia [internal] type: VideoGuard Sky Italia (09CD), caid: 09CD
2013/01/15 19:16:45 5C16C8 r skyitalia [internal] serial: ########, BoxID: ########, baseyear: 1997
2013/01/15 19:16:45 5C16C8 r skyitalia [internal] ready for requests
2013/01/15 19:16:45 5C16C8 r skyitalia [internal] found card system videoguard2
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] card detected
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] type: VideoGuard Sky Italia (09CD)
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 000b, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 021a, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 021b, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 0222, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 0228, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 022e, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 026b, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 0295, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 029a, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 029b, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 029c, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 029d, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 029e, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 029f, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 02f3, expiry date: 2013/02/25-00:00:00
2013/01/15 19:16:45 5C16C8 r skyitalia [videoguard2] tier: 02fe, expiry date: 2013/02/25-00:00:00

[tiger982]

Re: [DM800SE]configurazione corretta per 09cd e oscam

2013/01/15 19:17:05 5C16C8 r skyitalia [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2013/01/15 19:17:05 2B0028B0 c user (09CD&000000/0000/35C8/B7:BA51A37F6BE88BC821C030E4A750484A): not found (26 ms) by skyitalia

mi si presenta continuamente questo problema e nessuna visione.

[BliNeR-KeY]

Re: configurazione corretta per 09cd e oscam

se usi questa config hai 45 ecm time...
grazie a ruben

[BliNeR-KeY]

Re: configurazione corretta per 09cd e oscam

oscam.conf

[global]
#logfile                       = /var/log/ruben.log
#emmlogdir                     = /var/log/
nice                          = -1
#maxlogsize                    = 2480
preferlocalcards              = 1
saveinithistory               = 1
lb_mode                       = 1
lb_nbest_readers              = 2
lb_reopen_mode                = 1

[monitor]
hideclient_to                 = 15
appendchaninfo                = 0

[newcamd]
port                          = 30000@09CD:000000
key                           = 0102030405060708091011121314

[cs357x]
port                          = 40000

[cccam]
port                          = 10050
reshare                       = 2
version                       = 2.0.11
nodeid                        = EA23B17410B6152C

[dvbapi]
enabled                       = 1
au                            = 1
boxtype                       = dreambox
user                          = dvbapi

[webif]
httpport                      = 44444
httphelplang                  = it
#httptpl                       = /usr/local/etc/Carbon/IC_CARBON.tpl/
httprefresh                   = 30
httpallowed                   = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.254,82.56.92.111

oscam.user

[account]
user                          = dvbapi
pwd                           = 
group                         = 1,2,3,4,5,6,7,8,9,10
au                            = skyitalia
cccmaxhops                    = 0

[account]
user                          = ruben
pwd                           = bliner-key.com
group                         = 1
au                            = skyitalia
cccignorereshare              = 0

oscam.server

[reader]
label                         = skyitalia
protocol                      = internal
device                        = /dev/sci0
caid                          = 09CD
boxid                         = 12345678
ins7e11                       = 15
detect                        = cd
mhz                           = 200
cardmhz                       = 357
ident                         = 09CD:000000
group                         = 1
emmcache                      = 1,1,2
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1

[tiger982]

Re: configurazione corretta per 09cd e oscam

no reader interno su dm800se

[BliNeR-KeY]

Re: configurazione corretta per 09cd e oscam

con cosa ti serve a fare funzionare ?
smargo?

[tiger982]

salve,

vorrei capire come configurare al meglio oscam con la 09cd di S*yIt

avete qualcosa di funzionante?

grazie